KK3Q (ex-KD4KU & WD4HSA)
EPC #786 | CDG #131 | NDG#120
30 Meter Digital Group #0198
SRT #259 | DMClub #689
ARLHS #1366 | 10-10 #26039
Feld Hell #FH 733 | 070 #581
The QSL Book, on sale now
Zero Five Antenna Installation
After the hurricanes of 2005 came roaring through Orlando I had little, if anything left of the 3 element, tri-band quad that had served me so well for over 20 years. After the storms were gone and hurricane season was over here I decided it was time for a major renovation of the antenna "farm". The tower and quad were taken down, the VHF antennas were taken down for repair, the remains of the Butternut were taken down and sold.
I decided I wanted an antenna that I could maintain without climbing a tower, that covered all bands to replace both the quad and the Butternut. I had settled on a vertical of sorts being that the average sized lot I live on wouldn't allow a decent wire antenna system. Problem was deciding on just what vertical I wanted, so I gathered up some magazines and, coupled with some Internet searches, and started comparison shopping. Of course the most popular brands came to mind:
However, I came across one brand during my shopping that I had never heard of before: Zero Five. I went and added Zero Five to my shopping list and started comparing them all and finally decided to settle on the Zero Five for several reasons:
No gimmicks to adjust
Good reports from current owners
Price was a consideration, but it was a small one as they are all fairly equal in pricing with the exception of the Steppir. Radials were not a consideration as I have had several verticals and they all seemed to work best with radials under them, despite the advertising that a couple of them required no radials.
Antenna Assembly & Installation
When the antenna arrived I was surprised at the packaging, kind of small for a 43 foot antenna, one thing was evident was that the the crew at Zero Five really know how to pack their product. Upon opening the box I found NO INSTRUCTIONS, but it took a minute or two to figure out that the parts were all pre-marked as to how far in they should be inserted in the next sized tube. As I have read about this antenna, it was together in 45 minutes and ready to tilt up on the tilt-over base that came with it. Once the antenna was up I had to fight the urge to use it as I had yet to finish installing the radials. Once the antenna was up (a beauty of an antenna) I went back to completing the radials. All in all I have 3500 feet of 12 gauge copper wire in the 75 radials.
Does It Work?
It does work, it is quieter than other verticals I have owned. I has allowed me to hit Europe on 40 and 80 meters with little effort and I run my rig barefoot (In fact I don't even own an HF amp). During the VP6DX expedition I worked them 17 times on 3 different modes. Along with VP6DX there has been 5J0E, 5T5DC, TX5C, 9X0R and others. Contesting isn't may main focus of radio but I do get results with the antenna.
For more information about the Zero Five vertical: http://www.zerofive-antennas.com/